Re: Filetransfer drop-outs with Bluetooth

OK. I have been digging around a little bit now and the culprit seems to be
SE Syncprogram (PC Suit for P800 v. 1.5.1).
The USB Bluetooth software from IOGear can receive files directly from my
P800 without any problem and I can transfer big files (tried with 450K)
directly to other Bluetooth devices (Palm Tungsten T) without any problems
at all in the same environment.

/Dennis

"Dennis Lindqvist" <nospam@world.net> wrote in message
news:3ef61b99@news.wineasy.se...
> Thanks Tony,
>
> I always forget to control that setting.
> We also have a WiFi net in place (and the transmitter is in fact in the
very
> next room).
>
> I'll have a ago in another environment too.
>
> /Dennis
>
> "Tony Clark" <waclark@mindspring.com> wrote in message
> news:bd4vt4$t35$1@slb0.atl.mindspring.net...
> > I have seen similar problems with my Belkin USB adapter and my Sony
T68i.
> > There are 2 things you can look into. First on the PC in the hardware
> > manager,assuming Win XP, (My Computer --> Properties -->Device
> > Manager -->Universal Serial Bus controllers -->USB Root
> > Hub-->Properties -->Power Management) look and see if you have disabled
> the
> > "Allow the computer to turn off this device to save power" option.
> >
> > The second is do you have any other wireless devices running at the same
> > time such as WiFi adapters on the PC or perhaps a wireless phone system?
I
> > have strong suspicisions that Bluetooth, WiFi and certain wireless
phones
> > can cause interference with each other.
> >
> > I am sending my T68i back to SE for a firmware upgrade and a look at the
> > hardware as I suspect that there are some problems with the Bluetooth
> > transmitter in the phone. The signal doesn't seem very strong.
> >
> > Cheers
> > TC
> >
> >
> > "Dennis Lindqvist" <nospam@world.net> wrote in message
> > news:3ef481fb$1@news.wineasy.se...
> > > Hi everyone,
> > >
> > > This thing is driving me mad.
> > > I am trying not to use my sync station but using Bluetooth instead to
> > > transfer files between my P800 and my various computers.
> > >
> > > I have no problem getting the devices paired.
> > > But when connecting the Bluetooth serial device (using my IOGear USB
> > > Bluetooth dongle) it gets disconnected at once and the Phone Manager
> steps
> > > in and waits for my P800 to reconnect (which obviously is the default
> > > behavior which I can live with) and I get connected.
> > >
> > > The only problem is that the transfers breaks after a while. It
doesn't
> > seem
> > > to matter how much data I am sending (it can range from 16 KB to 100
of
> > > KBs).
> > > Is this normal behavior for the P800 and what can I do to keep the
> > > connection alive?
> > >
> > > Should I go for Epocware's Filetransfer instead?
> > >
> > > /Dennis
> > >
> > >
> >
> >
>
>