K750i hangs while using Bluetooth

> Press the following key combination to see what software version you have on
> your mobile:
>
> "> * < < * < *"
Thanks for this very interesting key combination! It worked, after a
little correction...

> R1AA008 is the latest firmware, and apparently fixes issues with bluetooht.
> Try upgrading via www.sonyericsson.com 'SEUS' (sony ericsson update service)
> and see how it goes, it's worth a go! :-)
Well, as I already knew before, I am using the latest software version.
This doesn't seem to help me. I will try to re-upgrade once again. Maybe
the update was not completed correctly, allthough I didn't get an error
message... And - as I wrote before - I really do think, that these
problems have only begun after i upgraded to the latest software version...

strange!

"Martin Lennertz" <martin.lennertz@arcor.de> wrote in message
news:44037b06$0$13603$9b4e6d93@newsread2.arcor-online.net...
>> Press the following key combination to see what software version you have
>> on
>> your mobile:
>>
>> "> * < < * < *"
> Thanks for this very interesting key combination! It worked, after a
> little correction...
>
>> R1AA008 is the latest firmware, and apparently fixes issues with
>> bluetooht.
>> Try upgrading via www.sonyericsson.com 'SEUS' (sony ericsson update
>> service)
>> and see how it goes, it's worth a go! :-)
> Well, as I already knew before, I am using the latest software version.
> This doesn't seem to help me. I will try to re-upgrade once again. Maybe
> the update was not completed correctly, allthough I didn't get an error
> message... And - as I wrote before - I really do think, that these
> problems have only begun after i upgraded to the latest software
> version...
>
> strange!

Oops, apologies about the key combination, must've mis-typed it originally!

I find ra11008 fine with bluetooth; do you have the generic install of
firmware, or is it customised by o2, vodafone, orange, etc? I find generic
best personally, but individual tastes and so forth.

It could just be the devices you are connecting to; is power-saving mode on
or off? You could try switching it on to only allow 1 bluetooth connection,
and start from there. Certainly very strange however!

> Oops, apologies about the key combination, must've mis-typed it originally!
No problem. The first keystroke (arrow key to the right >) made my
newsreader display it as it was a quote sign... with a little bit of
thinking I got it right ;-)

> I find ra11008 fine with bluetooth; do you have the generic install of
> firmware, or is it customised by o2, vodafone, orange, etc? I find generic
> best personally, but individual tastes and so forth.
I think it's not really generic. I've got german "E-Plus" as my
provider. It says something like

---
Modification/Customization (don't know the exact translation) CDA
102338/ 19 R 18A cxc 125953 E 1AA008 E_PLUS
---

> It could just be the devices you are connecting to; is power-saving mode on
> or off? You could try switching it on to only allow 1 bluetooth connection,
> and start from there. Certainly very strange however!
But I solved it! Let me tell you how: As I wrote before, I thought that
something went wrong with an earlier update of the firmware. So I tried
it once again and did my update with the SEUS tool.

Everything looked good. And I did not touch my phone during the process
- like it was written there ;-) And now: Everything is fine! No
bluetooth problems anymore!

This time the update must have been REALLY successful, because I can
definitely see a change in the behaviour of my phone: When you send a
message by SMS, you can see a little status bar in the display during
the sending process. Before, when I had my bluetooth problems, there was
no moving cursor inside this status bar.

But now, after that successful update, there is one. It's the way it
shuld be, I think! This let's me believe, that only after the latest
update the software really works correctly.

So, despite of that: Thanks a lot, Taylor!

By the way, can you explain me, how this "DaVinci SonyEricsson Remote
Unlocking and Flashing" works and for whom it might be useful?

Regards,
Martin

Seems there was a 2 week period at Sony Ericsson in malaysia where the
wrong resistors were used on the bluetotthe circuit in the K750i and the
W800i.

If your phone was built from Monday 05W40 to Tuesday 05W41, then it will
be affected. There was 11700 phones built in that period.

If yours is one of those, it has to be taken to a Sony Ericsson service
center to be repaired.

If you need to find out for sure, i have a list of the affected IMEI
numbers in an excel file.

Martin Lennertz wrote:
>>Oops, apologies about the key combination, must've mis-typed it originally!
>
> No problem. The first keystroke (arrow key to the right >) made my
> newsreader display it as it was a quote sign... with a little bit of
> thinking I got it right ;-)
>
>
>>I find ra11008 fine with bluetooth; do you have the generic install of
>>firmware, or is it customised by o2, vodafone, orange, etc? I find generic
>>best personally, but individual tastes and so forth.
>
> I think it's not really generic. I've got german "E-Plus" as my
> provider. It says something like
>
> ---
> Modification/Customization (don't know the exact translation) CDA
> 102338/ 19 R 18A cxc 125953 E 1AA008 E_PLUS
> ---
>
>
>>It could just be the devices you are connecting to; is power-saving mode on
>>or off? You could try switching it on to only allow 1 bluetooth connection,
>>and start from there. Certainly very strange however!
>
> But I solved it! Let me tell you how: As I wrote before, I thought that
> something went wrong with an earlier update of the firmware. So I tried
> it once again and did my update with the SEUS tool.
>
> Everything looked good. And I did not touch my phone during the process
> - like it was written there ;-) And now: Everything is fine! No
> bluetooth problems anymore!
>
> This time the update must have been REALLY successful, because I can
> definitely see a change in the behaviour of my phone: When you send a
> message by SMS, you can see a little status bar in the display during
> the sending process. Before, when I had my bluetooth problems, there was
> no moving cursor inside this status bar.
>
> But now, after that successful update, there is one. It's the way it
> shuld be, I think! This let's me believe, that only after the latest
> update the software really works correctly.
>
> So, despite of that: Thanks a lot, Taylor!
>
> By the way, can you explain me, how this "DaVinci SonyEricsson Remote
> Unlocking and Flashing" works and for whom it might be useful?
>
> Regards,
> Martin

Hi,

Could you please send me that list? I have a w800i with bluetooth headset
issues
that firmware updating did not fix. thanks

Damien

On Fri, 03 Mar 2006 10:56:50 +1100, Ken <nospam@no.com> wrote:

> Seems there was a 2 week period at Sony Ericsson in malaysia where the
> wrong resistors were used on the bluetotthe circuit in the K750i and the
> W800i.
>
> If your phone was built from Monday 05W40 to Tuesday 05W41, then it will
> be affected. There was 11700 phones built in that period.
>
> If yours is one of those, it has to be taken to a Sony Ericsson service
> center to be repaired.
>
> If you need to find out for sure, i have a list of the affected IMEI
> numbers in an excel file.
>
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Any chance you could send me that list too?

We have some K750i in our firm, which hangs sometimes - especially when
using BlueTooth.

TIA,

Pistolprinsen

Mail to: net at yaws dot dk



"damien" <bingeell@nospam.hotmail.com> skrev i en meddelelse
newsp.s6f45cdberchc2@navi-01.nsw.optushome.com.au...
> Hi,
>
> Could you please send me that list? I have a w800i with bluetooth headset
> issues
> that firmware updating did not fix. thanks
>
> Damien
>
> On Fri, 03 Mar 2006 10:56:50 +1100, Ken <nospam@no.com> wrote:
>
>> Seems there was a 2 week period at Sony Ericsson in malaysia where the
>> wrong resistors were used on the bluetotthe circuit in the K750i and the
>> W800i.
>>
>> If your phone was built from Monday 05W40 to Tuesday 05W41, then it will
>> be affected. There was 11700 phones built in that period.
>>
>> If yours is one of those, it has to be taken to a Sony Ericsson service
>> center to be repaired.
>>
>> If you need to find out for sure, i have a list of the affected IMEI
>> numbers in an excel file.
>>
> --
> Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Done, sorry for the delay

Pistolprinsen wrote:
> Any chance you could send me that list too?
>
> We have some K750i in our firm, which hangs sometimes - especially when
> using BlueTooth.
>
> TIA,
>
> Pistolprinsen
>
> Mail to: net at yaws dot dk
>
>
>
> "damien" <bingeell@nospam.hotmail.com> skrev i en meddelelse
> newsp.s6f45cdberchc2@navi-01.nsw.optushome.com.au...
>
>>Hi,
>>
>>Could you please send me that list? I have a w800i with bluetooth headset
>>issues
>>that firmware updating did not fix. thanks
>>
>>Damien
>>
>>On Fri, 03 Mar 2006 10:56:50 +1100, Ken <nospam@no.com> wrote:
>>
>>
>>>Seems there was a 2 week period at Sony Ericsson in malaysia where the
>>>wrong resistors were used on the bluetotthe circuit in the K750i and the
>>>W800i.
>>>
>>>If your phone was built from Monday 05W40 to Tuesday 05W41, then it will
>>>be affected. There was 11700 phones built in that period.
>>>
>>>If yours is one of those, it has to be taken to a Sony Ericsson service
>>>center to be repaired.
>>>
>>>If you need to find out for sure, i have a list of the affected IMEI
>>>numbers in an excel file.
>>>
>>
>>--
>>Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
>
>
>

> Done, sorry for the delay
>
> Pistolprinsen wrote:
>> Any chance you could send me that list too?
>>
>> We have some K750i in our firm, which hangs sometimes - especially
>> when using BlueTooth.
>>
>> TIA,
>>
>> Pistolprinsen
>>
>> Mail to: net at yaws dot dk
>>
>>
>>
>> "damien" <bingeell@nospam.hotmail.com> skrev i en meddelelse
>> newsp.s6f45cdberchc2@navi-01.nsw.optushome.com.au...
>>
>>> Hi,
>>>
>>> Could you please send me that list? I have a w800i with bluetooth
>>> headset issues
>>> that firmware updating did not fix. thanks
>>>
>>> Damien
>>>
>>> On Fri, 03 Mar 2006 10:56:50 +1100, Ken <nospam@no.com> wrote:
>>>
>>>
>>>> Seems there was a 2 week period at Sony Ericsson in malaysia where
>>>> the wrong resistors were used on the bluetotthe circuit in the K750i
>>>> and the W800i.
>>>>
>>>> If your phone was built from Monday 05W40 to Tuesday 05W41, then it
>>>> will be affected. There was 11700 phones built in that period.
>>>>
>>>> If yours is one of those, it has to be taken to a Sony Ericsson
>>>> service center to be repaired.
>>>>
>>>> If you need to find out for sure, i have a list of the affected IMEI
>>>> numbers in an excel file.

Sorry, Ken, but could you send the list to me, too? I asked for it by
sending a message to your personal e-mail address, but it seems to me,
that this was not your real address...

Martin