Nokia 9500 wifi

On Fri, 24 Dec 2004, Andreas Buchner wrote:

> > Hi. I'm trying to activate wifi on my 9500. I have a WLAN here att home
> > (both 11B and 11G) with 64 bits WEP encryption enabled. The phone finds
> > the network. I select it and chooses "new connection point" (or what the
> > key is called in englsih =)). I got a question such as "do you want to
> > create a new default internet connection for the selected network?" I
> > select yes. Then I got some choices for wep encryption. For example key
> > type. I select hex. But the keylength in bits.. There are 40 bit keys and
> > a few more options but not 64 bits. When typing in my wep key in hex and
> > press OK it doesn't connect to my wlan. What do I do wrong?
>
> Nothing 40 + 24 bit = 64 bit so the keylength is o.k.
> Just switch off Bluetooth and WiFi at the same time:
> WirelessLAN Settings -> Simultaneous Bluetooth usage -> not allowed

Hi. Yes I have switched of that but it still says "not connected" in the
status page. I guess that it will connect automatically when within the
area, I don'ät need to connect manually?

--
__________________________________________________ _________________
Joakim Nomell Phn: +46 70 771 31 00 MSN : joakim@nomell.nu
Unix engineer Fax: +46 70 711 31 00 Web : http://nomell.se
-------------------------------------------------------------------

On Fri, 24 Dec 2004, Andreas Buchner wrote:

> Nothing 40 + 24 bit = 64 bit so the keylength is o.k.

Thanks it works fine now.

> Just switch off Bluetooth and WiFi at the same time:
> WirelessLAN Settings -> Simultaneous Bluetooth usage -> not allowed

I don't need to switch that off. My 9500 works fine with simultaneous
bluetooth connections.

--
__________________________________________________ _________________
Joakim Nomell Phn: +46 70 771 31 00 MSN : joakim@nomell.nu
Unix engineer Fax: +46 70 711 31 00 Web : http://nomell.se
-------------------------------------------------------------------

hi i have the same problem with my nokia 9500 at home i have a wireles
network between a alptop and desk top which is 64 bits and uses WE
security and has upto 4 hex keys. i have gone into internet setup o
my phone and setup a new access point (although should network mode b
ad-hoc or infrastructure?) and selected security as wap and i
detected my wireless conection and named it automatically for me. the
in the advanced options i left the IP config and proxies setting alon
and then went to the WEP tab and wep authentication is open and i hav
selected 40 bits and then i input the correct hex code. then when
goto web and input a www site it says connection and can connect bu
does not load the webpage.. i have gone into wireless settings and i
says connected and the signal is excellent but the connection qualit
(withthe blue bar) is just 0% please help!! i also have blue toot
of

--
gran
brought to you by http://www.wifi-forum.com

forgot to mention on the web page i get an error saying Internet: could
no find specified internet server.


--
grant
brought to you by http://www.wifi-forum.com/

"Andreas Buchner" <buch_new@calia.de> wrote in message
news:18or4ekise8iy$.667suc6qcww5$.dlg@40tude.net.. .
> Am Fri, 24 Dec 2004 14:29:44 +0100 schrieb Joakim Nömell:
>
>> Hi. I'm trying to activate wifi on my 9500. I have a WLAN here att home
>> (both 11B and 11G) with 64 bits WEP encryption enabled. The phone finds
>> the network. I select it and chooses "new connection point" (or what the
>> key is called in englsih =)). I got a question such as "do you want to
>> create a new default internet connection for the selected network?" I
>> select yes. Then I got some choices for wep encryption. For example key
>> type. I select hex. But the keylength in bits.. There are 40 bit keys and
>> a few more options but not 64 bits. When typing in my wep key in hex and
>> press OK it doesn't connect to my wlan. What do I do wrong?
>
> Nothing 40 + 24 bit = 64 bit so the keylength is o.k.
> Just switch off Bluetooth and WiFi at the same time:
> WirelessLAN Settings -> Simultaneous Bluetooth usage -> not allowed
>
> Regards,
> ANdi


This is a bit of a myth. My 9500 has BT and wifi on all the time, no
problems. The trick is that the phone only accesses the wifi network when
it needs to. Unlike a true network device (that latches on and stays on)
the 9500 sits there and doesn't connect until it wants to. Set up your
browser to use your new access point, then try and open a webpage....

hi

i have the same problems posted here..

1º 42+24=64, but i can't understand a thingh... so, if my key is, e.g
ELEFANTE with 64bits, the acess point give me one hex key, which i
larger than the key which 9500 accepts in 42bits wep key mode... ho
can i make that

2º I've tried to change de security mode to WPA, here i can connect t
the wireless net, but the phone gives me, after "connected"
"importing"... and nothing more..

3º i've put "not allowed" the bt with wifi, i've tried everything tha
i read... but without any results..

...need help!

many thanks

Mr Li

--
Mr Li
brought to you by http://www.wifi-forum.com

ok! :

with wpa i've it is working: wireless @ 9500 is ok! thanks to th
posters abov

but, i don´t need the first answer but still don´t understand... th
lenght of the wep key 40+24=64..

many thanks guys!!!

--
Mr Li
brought to you by http://www.wifi-forum.com