PC suite with Bluetoth??
Posts: n/a Have dongle from sitecom connected to serial port link but some how it doesn't work. The mRouter always gives an error by connection and the PC-suite doesn't see any phone?? Can anyone explain in simple englishe how to make contact? Thanks..  Responses to "PC suite with Bluetoth??"
Posts: n/a
Posts: n/a Re: PC suite with Bluetoth?? "Tero Lehto" <tero-news23@lehto.net> schreef in berichtnews:KSP%b.131$cU2.67@reader1.news.jippii.net... > dd wrote: > > How is it possible to connect the PC suite with the Nokia 6600 by > > Bluetooth. Have dongle from sitecom connected to serial port link but > > some how it doesn't work. The mRouter always gives an error by > > connection and the PC-suite doesn't see any phone?? > > The procedure is basically the following: > > 1) Check that your Bluetooth adapter hardware is functional. Most drivers > install an application where you can verify this. > 2) Check (Windows Control Panel -> Device Manager) that your BT adapter has > installed virtual COM port drivers for itself. > 3) Check which COM port is assigned for "Bluetooth Serial Port" settings. > Usually this is your BT adapter's services settings. > 4) If your BT adapter has for example COM4 assigned for the Bluetooth Serial > Port, activate this port in the mRouter application. > 5) Now have your Nokia 6600 and PC make atrusted pair ("Search for Bluetooth > devices in range....") and set passwords to both of them. > 6) When you have a Bluetooth Serial Port link activated, mRouter will show > "Connected" status next to the according port and its icon will turn green > and blue. > 7) Now you can start the Nokia PC Suite and it should ask you to set a name > for your mobile device. > > More discussion and advice related to connection problems with the 6600 and > PC Suite: > > http://tinyurl.com/33e2c > http://tinyurl.com/2ehu3 > > -- > Tero Lehto > http://lehto.net/tero/ > > Thanks Tero, But I did pair the laptop with the 6600 with passwords on both of them and did set the serial port active (com7) but as soon I start the mRouter it will get a conflict with it and BT brakes down. It will not see the 6600 on the suite and after one try the BT isn't able to acces anymore. I use a 6600 with a laptop centrino with wifi and a sitecom BT. the 6600 does even show the (O) sign that it has connection. As soon PC suite starts it doesn't show other the error message from windows that mRouter is get a conflict and if I would like to send the report. I get little lost here with my options what to do Any idea's? (other then throw it out of the window...)
Posts: n/a Re: PC suite with Bluetoth?? Your link certainly helped me. I'd given up getting mRouter to see my COMports but by following the advice on the Symbian forum I finally succeeded. Specifically: (1) Disable any internal modem. (2) When reinstalling dongle s/w, make sure device remains disconnected until after reinstallation is complete and you have rebooted. "Tero Lehto" <tero-news23@lehto.net> wrote in message news:KSP%b.131$cU2.67@reader1.news.jippii.net... > dd wrote: > > How is it possible to connect the PC suite with the Nokia 6600 by > > Bluetooth. Have dongle from sitecom connected to serial port link but > > some how it doesn't work. The mRouter always gives an error by > > connection and the PC-suite doesn't see any phone?? > > The procedure is basically the following: > > 1) Check that your Bluetooth adapter hardware is functional. Most drivers > install an application where you can verify this. > 2) Check (Windows Control Panel -> Device Manager) that your BT adapter has > installed virtual COM port drivers for itself. > 3) Check which COM port is assigned for "Bluetooth Serial Port" settings. > Usually this is your BT adapter's services settings. > 4) If your BT adapter has for example COM4 assigned for the Bluetooth Serial > Port, activate this port in the mRouter application. > 5) Now have your Nokia 6600 and PC make atrusted pair ("Search for Bluetooth > devices in range....") and set passwords to both of them. > 6) When you have a Bluetooth Serial Port link activated, mRouter will show > "Connected" status next to the according port and its icon will turn green > and blue. > 7) Now you can start the Nokia PC Suite and it should ask you to set a name > for your mobile device. > > More discussion and advice related to connection problems with the 6600 and > PC Suite: > > http://tinyurl.com/33e2c > http://tinyurl.com/2ehu3 > > -- > Tero Lehto > http://lehto.net/tero/ > >
Posts: n/a Re: PC suite with Bluetoth?? I have a similar problem with a 3310i & PC Suite 4.88 using a TDK Bluetoothadaptor. I can pair the phone with the PC but when I try to use PCSuite I get a message "Bluetooth API caused an error". Any ideas? EP "Tero Lehto" <tero-news23@lehto.net> wrote in message news:KSP%b.131$cU2.67@reader1.news.jippii.net... > dd wrote: > > How is it possible to connect the PC suite with the Nokia 6600 by > > Bluetooth. Have dongle from sitecom connected to serial port link but > > some how it doesn't work. The mRouter always gives an error by > > connection and the PC-suite doesn't see any phone?? > > The procedure is basically the following: > > 1) Check that your Bluetooth adapter hardware is functional. Most drivers > install an application where you can verify this. > 2) Check (Windows Control Panel -> Device Manager) that your BT adapter has > installed virtual COM port drivers for itself. > 3) Check which COM port is assigned for "Bluetooth Serial Port" settings. > Usually this is your BT adapter's services settings. > 4) If your BT adapter has for example COM4 assigned for the Bluetooth Serial > Port, activate this port in the mRouter application. > 5) Now have your Nokia 6600 and PC make atrusted pair ("Search for Bluetooth > devices in range....") and set passwords to both of them. > 6) When you have a Bluetooth Serial Port link activated, mRouter will show > "Connected" status next to the according port and its icon will turn green > and blue. > 7) Now you can start the Nokia PC Suite and it should ask you to set a name > for your mobile device. > > More discussion and advice related to connection problems with the 6600 and > PC Suite: > > http://tinyurl.com/33e2c > http://tinyurl.com/2ehu3 > > -- > Tero Lehto > http://lehto.net/tero/ > >
Posts: n/a Re: PC suite with Bluetoth?? I have had similar problems which were caused by Mcafee antivirus andfirewall software, when I disable them works a treat. Just make sure you disconnect from the internet before disableing them "dd" <test@hetgooi..net> wrote in message news:403fcdc7$0$11497$3a628fcd@reader2.nntp.hccnet .nl... > "Tero Lehto" <tero-news23@lehto.net> schreef in bericht > news:KSP%b.131$cU2.67@reader1.news.jippii.net... > > dd wrote: > > > How is it possible to connect the PC suite with the Nokia 6600 by > > > Bluetooth. Have dongle from sitecom connected to serial port link but > > > some how it doesn't work. The mRouter always gives an error by > > > connection and the PC-suite doesn't see any phone?? > > > > The procedure is basically the following: > > > > 1) Check that your Bluetooth adapter hardware is functional. Most drivers > > install an application where you can verify this. > > 2) Check (Windows Control Panel -> Device Manager) that your BT adapter > has > > installed virtual COM port drivers for itself. > > 3) Check which COM port is assigned for "Bluetooth Serial Port" settings. > > Usually this is your BT adapter's services settings. > > 4) If your BT adapter has for example COM4 assigned for the Bluetooth > Serial > > Port, activate this port in the mRouter application. > > 5) Now have your Nokia 6600 and PC make atrusted pair ("Search for > Bluetooth > > devices in range....") and set passwords to both of them. > > 6) When you have a Bluetooth Serial Port link activated, mRouter will show > > "Connected" status next to the according port and its icon will turn green > > and blue. > > 7) Now you can start the Nokia PC Suite and it should ask you to set a > name > > for your mobile device. > > > > More discussion and advice related to connection problems with the 6600 > and > > PC Suite: > > > > http://tinyurl.com/33e2c > > http://tinyurl.com/2ehu3 > > > > -- > > Tero Lehto > > http://lehto.net/tero/ > > > > > Thanks Tero, > > But I did pair the laptop with the 6600 with passwords on both of them and > did set the serial port active (com7) > but as soon I start the mRouter it will get a conflict with it and BT brakes > down. > It will not see the 6600 on the suite and after one try the BT isn't able to > acces anymore. > I use a 6600 with a laptop centrino with wifi and a sitecom BT. > the 6600 does even show the (O) sign that it has connection. As soon PC > suite starts it doesn't show > other the error message from windows that mRouter is get a conflict and if I > would like to send the report. > I get little lost here with my options what to do > > Any idea's? > (other then throw it out of the window...) > >
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
Linear Mode
