"BruceR" <br@NOhawaiiSPAM.com> wrote in
news:Cl78g.14531$MP2.11367@tornado.socal.rr.com:

> RSD Lite is the better choice. PST won't work with the v3i. Once you
> flash the lang pack you'll also need to replace the VST files.
> P2kCommander is a good program for that. The new VST files are here:
> http://www.planetmotox.net/razr_v3i/language_packs.php

Thanks, I didn't see them on the other page. I thought the command
language files would be included in the language pack.

I'd like to use the MXLP0001 and the VST files you pointed out
together. They don't seem to be grouped on the same page. Will they
still work all right together?

I grabbed a copy of P2kComander. Will it be obvious where the new VST
files go?

Rather than giving you piecemeal info and risking leaving something out,
please read this thread:
http://www.motox.info/showthread.php?t=9829 for a detailed guide.


> "BruceR" <br@NOhawaiiSPAM.com> wrote in
> news:Cl78g.14531$MP2.11367@tornado.socal.rr.com:
>
>> RSD Lite is the better choice. PST won't work with the v3i. Once you
>> flash the lang pack you'll also need to replace the VST files.
>> P2kCommander is a good program for that. The new VST files are here:
>> http://www.planetmotox.net/razr_v3i/language_packs.php
>
> Thanks, I didn't see them on the other page. I thought the command
> language files would be included in the language pack.
>
> I'd like to use the MXLP0001 and the VST files you pointed out
> together. They don't seem to be grouped on the same page. Will they
> still work all right together?
>
> I grabbed a copy of P2kComander. Will it be obvious where the new VST
> files go?

"BruceR" <br@NOhawaiiSPAM.com> wrote in
news:Z798g.6706$yM.1612@tornado.socal.rr.com:

> Rather than giving you piecemeal info and risking leaving something
> out, please read this thread:
> http://www.motox.info/showthread.php?t=9829 for a detailed guide.

I read quite a bit on "The Moto Guide" and several sticky notes on
MotoX's forum, including the one you mentioned on voice command
restoration. Good reading, thanks.

I'm not going to rush into this. I'll get the programs installed
tomorrow night and then start the upgrades. I'm probably going to flash
the MXLP0001 language pack and then upgrade the 0001 voice commands
after that.

That's the way I did it too. Once it was all done my voice dial success
rate went way up.


> "BruceR" <br@NOhawaiiSPAM.com> wrote in
> news:Z798g.6706$yM.1612@tornado.socal.rr.com:
>
>> Rather than giving you piecemeal info and risking leaving something
>> out, please read this thread:
>> http://www.motox.info/showthread.php?t=9829 for a detailed guide.
>
> I read quite a bit on "The Moto Guide" and several sticky notes on
> MotoX's forum, including the one you mentioned on voice command
> restoration. Good reading, thanks.
>
> I'm not going to rush into this. I'll get the programs installed
> tomorrow night and then start the upgrades. I'm probably going to
> flash the MXLP0001 language pack and then upgrade the 0001 voice
> commands after that.

Mine sure hasn't, I can't get my phone to understand the Arkansaw drawl. I
installed the Motox US english and the VST files, but it still can't
understand me. oh well.
...
bamp


"BruceR" <br@NOhawaiiSPAM.com> wrote in message
news:SGi8g.24$uM4.21@tornado.socal.rr.com...
> That's the way I did it too. Once it was all done my voice dial success
> rate went way up.
>
>
>> "BruceR" <br@NOhawaiiSPAM.com> wrote in
>> news:Z798g.6706$yM.1612@tornado.socal.rr.com:
>>
>>> Rather than giving you piecemeal info and risking leaving something
>>> out, please read this thread:
>>> http://www.motox.info/showthread.php?t=9829 for a detailed guide.
>>
>> I read quite a bit on "The Moto Guide" and several sticky notes on
>> MotoX's forum, including the one you mentioned on voice command
>> restoration. Good reading, thanks.
>>
>> I'm not going to rush into this. I'll get the programs installed
>> tomorrow night and then start the upgrades. I'm probably going to
>> flash the MXLP0001 language pack and then upgrade the 0001 voice
>> commands after that.
>
>

"BruceR" <br@NOhawaiiSPAM.com> wrote in
news:SGi8g.24$uM4.21@tornado.socal.rr.com:

> That's the way I did it too. Once it was all done my voice dial
> success rate went way up.

I flashed the MXLP0001 US language pack and installed the 0001 US VST
files tonight. It made a world of difference for me, too.

I used to get the "Name Dial" command correct about 60% of the time, and
then get "Caller Name" correct about 30% of the time, but I only got the
"Home" versus "Mobile" choice correct about 1 out of 20 times. That
added up to pretty bad odds for getting all three correct in a row. It
was something amusing to play with on trips though.

Thanks for pointing me in the right direction!

Glad it worked out!


>
> I flashed the MXLP0001 US language pack and installed the 0001 US VST
> files tonight. It made a world of difference for me, too.
>
> I used to get the "Name Dial" command correct about 60% of the time,
> and then get "Caller Name" correct about 30% of the time, but I only
> got the "Home" versus "Mobile" choice correct about 1 out of 20
> times. That added up to pretty bad odds for getting all three
> correct in a row. It was something amusing to play with on trips
> though.
>
> Thanks for pointing me in the right direction!