V3 ear piece volume
Posts: n/a of what I was getting out of my previous Nokia's and Panasonic phones. Is there an upgrade or fix by which I can increase the ear piece volume on these phones? Trying to use the phones in a crowded bar or on the street with traffic is almost impossible because you can't easily hear what the other party is saying. Jimmy  Responses to "V3 ear piece volume"
Posts: n/a
Posts: n/a Re: V3 ear piece volume "Jimmy Smith" <Holland@MST.com> wrote in message news  yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>I own several V3 phones. The ear piece volume on all of them is about half >of what I was getting out of my previous Nokia's and Panasonic phones. Is >there an upgrade or fix by which I can increase the ear piece volume on >these phones? Trying to use the phones in a crowded bar or on the street >with traffic is almost impossible because you can't easily hear what the >other party is saying. > > Jimmy Yes you can edit the gain_table.bin file with a hex editor. I just did my V400 and it has lots & lots of volume now. bamp
Posts: n/a Re: V3 ear piece volume "bamp" <bampatcenturyteldotnet> wrote in message news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... > > "Jimmy Smith" <Holland@MST.com> wrote in message > news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>I own several V3 phones. The ear piece volume on all of them is about >>half of what I was getting out of my previous Nokia's and Panasonic >>phones. Is there an upgrade or fix by which I can increase the ear piece >>volume on these phones? Trying to use the phones in a crowded bar or on >>the street with traffic is almost impossible because you can't easily hear >>what the other party is saying. >> >> Jimmy > > > Yes you can edit the gain_table.bin file with a hex editor. I just did my > V400 and it has lots & lots of volume now. Did you notice any downside to using this procedure? If you manually lower the volume on your altered phone, does it work just fine? > > > bamp >
Posts: n/a Re: V3 ear piece volume "bamp" <bampatcenturyteldotnet> wrote in message news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... > > "Jimmy Smith" <Holland@MST.com> wrote in message > news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>I own several V3 phones. The ear piece volume on all of them is about >>half of what I was getting out of my previous Nokia's and Panasonic >>phones. Is there an upgrade or fix by which I can increase the ear piece >>volume on these phones? Trying to use the phones in a crowded bar or on >>the street with traffic is almost impossible because you can't easily hear >>what the other party is saying. >> >> Jimmy > > > Yes you can edit the gain_table.bin file with a hex editor. I just did my > V400 and it has lots & lots of volume now. Did you notice any downside to using this procedure? If you manually lower the volume on your altered phone, does it work just fine? > > > bamp >
Posts: n/a Re: V3 ear piece volume "Jimmy Smith" <Holland@MST.com> wrote in message news:I7Yye.25872$ho.2616@bignews6.bellsouth.net... > > "bamp" <bampatcenturyteldotnet> wrote in message > news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... >> >> "Jimmy Smith" <Holland@MST.com> wrote in message >> news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>>I own several V3 phones. The ear piece volume on all of them is about >>>half of what I was getting out of my previous Nokia's and Panasonic >>>phones. Is there an upgrade or fix by which I can increase the ear piece >>>volume on these phones? Trying to use the phones in a crowded bar or on >>>the street with traffic is almost impossible because you can't easily >>>hear what the other party is saying. >>> >>> Jimmy >> >> >> Yes you can edit the gain_table.bin file with a hex editor. I just did my >> V400 and it has lots & lots of volume now. > > Did you notice any downside to using this procedure? If you manually > lower the volume on your altered phone, does it work just fine? There's no downside to it, the phone is set to a value of 1 by Motorola, in my case I turned it up to 3 and it worked ok. It is now loud enough that I turned it down about halfway with the volume control, no distortion either way. It helps to have the reserve for a low connection, noisy enviornment, etc. bamp
Posts: n/a Re: V3 ear piece volume "Jimmy Smith" <Holland@MST.com> wrote in message news:I7Yye.25872$ho.2616@bignews6.bellsouth.net... > > "bamp" <bampatcenturyteldotnet> wrote in message > news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... >> >> "Jimmy Smith" <Holland@MST.com> wrote in message >> news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>>I own several V3 phones. The ear piece volume on all of them is about >>>half of what I was getting out of my previous Nokia's and Panasonic >>>phones. Is there an upgrade or fix by which I can increase the ear piece >>>volume on these phones? Trying to use the phones in a crowded bar or on >>>the street with traffic is almost impossible because you can't easily >>>hear what the other party is saying. >>> >>> Jimmy >> >> >> Yes you can edit the gain_table.bin file with a hex editor. I just did my >> V400 and it has lots & lots of volume now. > > Did you notice any downside to using this procedure? If you manually > lower the volume on your altered phone, does it work just fine? There's no downside to it, the phone is set to a value of 1 by Motorola, in my case I turned it up to 3 and it worked ok. It is now loud enough that I turned it down about halfway with the volume control, no distortion either way. It helps to have the reserve for a low connection, noisy enviornment, etc. bamp
Posts: n/a Re: V3 ear piece volume Where is the best place to download these software tools in order to changethe gain table? Is this with the P2Kman? Also, can the CDs sold on CellCables.com do the trick? Thanks, Jimmy "bamp" <bampatcenturyteldotnet> wrote in message news:lpSdnTTLGZd7zFHfRVn-iw@centurytel.net... > > "Jimmy Smith" <Holland@MST.com> wrote in message > news:I7Yye.25872$ho.2616@bignews6.bellsouth.net... >> >> "bamp" <bampatcenturyteldotnet> wrote in message >> news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... >>> >>> "Jimmy Smith" <Holland@MST.com> wrote in message >>> news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>>>I own several V3 phones. The ear piece volume on all of them is about >>>>half of what I was getting out of my previous Nokia's and Panasonic >>>>phones. Is there an upgrade or fix by which I can increase the ear >>>>piece volume on these phones? Trying to use the phones in a crowded bar >>>>or on the street with traffic is almost impossible because you can't >>>>easily hear what the other party is saying. >>>> >>>> Jimmy >>> >>> >>> Yes you can edit the gain_table.bin file with a hex editor. I just did >>> my V400 and it has lots & lots of volume now. >> >> Did you notice any downside to using this procedure? If you manually >> lower the volume on your altered phone, does it work just fine? > > There's no downside to it, the phone is set to a value of 1 by Motorola, > in my case I turned it up to 3 and it worked ok. It is now loud enough > that I turned it down about halfway with the volume control, no distortion > either way. It helps to have the reserve for a low connection, noisy > enviornment, etc. > > > bamp > > > >
Posts: n/a Re: V3 ear piece volume Where is the best place to download these software tools in order to changethe gain table? Is this with the P2Kman? Also, can the CDs sold on CellCables.com do the trick? Thanks, Jimmy "bamp" <bampatcenturyteldotnet> wrote in message news:lpSdnTTLGZd7zFHfRVn-iw@centurytel.net... > > "Jimmy Smith" <Holland@MST.com> wrote in message > news:I7Yye.25872$ho.2616@bignews6.bellsouth.net... >> >> "bamp" <bampatcenturyteldotnet> wrote in message >> news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... >>> >>> "Jimmy Smith" <Holland@MST.com> wrote in message >>> news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>>>I own several V3 phones. The ear piece volume on all of them is about >>>>half of what I was getting out of my previous Nokia's and Panasonic >>>>phones. Is there an upgrade or fix by which I can increase the ear >>>>piece volume on these phones? Trying to use the phones in a crowded bar >>>>or on the street with traffic is almost impossible because you can't >>>>easily hear what the other party is saying. >>>> >>>> Jimmy >>> >>> >>> Yes you can edit the gain_table.bin file with a hex editor. I just did >>> my V400 and it has lots & lots of volume now. >> >> Did you notice any downside to using this procedure? If you manually >> lower the volume on your altered phone, does it work just fine? > > There's no downside to it, the phone is set to a value of 1 by Motorola, > in my case I turned it up to 3 and it worked ok. It is now loud enough > that I turned it down about halfway with the volume control, no distortion > either way. It helps to have the reserve for a low connection, noisy > enviornment, etc. > > > bamp > > > >
Posts: n/a Re: V3 ear piece volume "Jimmy Smith" <Holland@MST.com> wrote in message news:_C%ye.49611$Xv.32874@bignews4.bellsouth.net.. . > Where is the best place to download these software tools in order to > change the gain table? Is this with the P2Kman? Also, can the CDs sold > on > CellCables.com > > do the trick? > > Thanks, > > Jimmy > > "bamp" <bampatcenturyteldotnet> wrote in message > news:lpSdnTTLGZd7zFHfRVn-iw@centurytel.net... >> >> "Jimmy Smith" <Holland@MST.com> wrote in message >> news:I7Yye.25872$ho.2616@bignews6.bellsouth.net... >>> >>> "bamp" <bampatcenturyteldotnet> wrote in message >>> news:PJGdnTj2cNvyhVHfRVn-hA@centurytel.net... >>>> >>>> "Jimmy Smith" <Holland@MST.com> wrote in message >>>> news yPye.48016$Xv.40068@bignews4.bellsouth.net.. .>>>>>I own several V3 phones. The ear piece volume on all of them is about >>>>>half of what I was getting out of my previous Nokia's and Panasonic >>>>>phones. Is there an upgrade or fix by which I can increase the ear >>>>>piece volume on these phones? Trying to use the phones in a crowded >>>>>bar or on the street with traffic is almost impossible because you >>>>>can't easily hear what the other party is saying. >>>>> >>>>> Jimmy >>>> >>>> >>>> Yes you can edit the gain_table.bin file with a hex editor. I just did >>>> my V400 and it has lots & lots of volume now. >>> >>> Did you notice any downside to using this procedure? If you manually >>> lower the volume on your altered phone, does it work just fine? >> >> There's no downside to it, the phone is set to a value of 1 by Motorola, >> in my case I turned it up to 3 and it worked ok. It is now loud enough >> that I turned it down about halfway with the volume control, no >> distortion either way. It helps to have the reserve for a low connection, >> noisy enviornment, etc. >> >> >> bamp >> >> I used vxi32 to hex edit the file & MPT to upload & dowload to computer & back to phone. I tried to email you the info you needed, but it was too large for your mailbox. bamp
| |||||||||||||||||||||||||||||||||||||||||||||||||||||
Linear Mode
