I recently flashed/flexed my v525 but now when I hold down the 1
button to dial voicemail it instead calls one of the contacts in my
phonebook. How do I set it up so that holding the 1 will dial the
voicemail #?
Thanks.
Responses to "Holding down "1" for voicemail doesn't work?"
B
BruceR
Posts: n/a
Re: Holding down "1" for voicemail doesn't work?
Posted: 04-30-2004, 08:14 PM
Program the voicemail number into phone memory location 1 and it will
work. You'll have to delete or move the existing number that is set to
1. You can change the numbering in MPT 2.20. I've programmed mine to
dial the number, wait for the connection and then dial another 1 to
start playback. The 1 for voicemail is just a turbodial position like
the other single digits of 1-9.
> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.
BruceR
R. Mark Clayton
Posts: n/a
Re: Holding down "1" for voicemail doesn't work?
Posted: 05-01-2004, 01:44 AM
"B" <stuff@bcx.ca> wrote in message
news:1nq490h65cr2n1tn332pfl5e4ltuvqnij7@4ax.com...
>
> I recently flashed/flexed my v525 but now when I hold down the 1
> button to dial voicemail it instead calls one of the contacts in my
> phonebook. How do I set it up so that holding the 1 will dial the
> voicemail #?
>
> Thanks.
A user configuration issue. AIUI you can program just about anything you
like to lie behind the number pad, but when flashed this may be lost.