GSM Hacks > Mobile Phones & Devices > Motorola > How to change "My Tel Number" on a V60i? Service Technician menu?

How to change "My Tel Number" on a V60i? Service Technician menu?

Posted: 09-11-2003, 09:58 PM
Mark Harris
Mark Harris's Avatar
Posts: n/a
 
Ok, I received a 'new' V60i today supplied by an online cellular
provider. ATT service included. Phone works fine, calls in and out
perfect.

There is however a field called "My Tel Number" which displays a
different phone number! The phone displays the wrong number, but
actually works fine with the proper assigned number. Seems there must
be an informational field somewhere that their service technician must
have set wrong (or this might have been a returned phone and the
original customer's number was not cleared properly).

Anyone have the keystroke sequences to get to the V60i service
technician menus? I assume a simple re-setup of that display field will fix
it.

Ideas?
Reply With Quote

Responses to "How to change "My Tel Number" on a V60i? Service Technician menu?"

Diamond Dave
Diamond Dave's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 09-13-2003, 12:40 PM
You probably need to change the NAM settings

I assume the v60 has the same programming codes as the v120. If so, do
the following:

From an idle screen, dial

74663 # Menu Menu

Then select NAM1

Make sure the MIN and MDN are the same number (the correct number for
your phone)

Dave



On 11 Sep 2003 13:58:23 -0700, markharris@attbi.com (Mark Harris)
wrote:

>Ok, I received a 'new' V60i today supplied by an online cellular
>provider. ATT service included. Phone works fine, calls in and out
>perfect.
>
>There is however a field called "My Tel Number" which displays a
>different phone number! The phone displays the wrong number, but
>actually works fine with the proper assigned number. Seems there must
>be an informational field somewhere that their service technician must
>have set wrong (or this might have been a returned phone and the
>original customer's number was not cleared properly).
>
>Anyone have the keystroke sequences to get to the V60i service
>technician menus? I assume a simple re-setup of that display field will fix
>it.
>
>Ideas?

Reply With Quote
ian@hubling.com
ian@hubling.com's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 09-30-2003, 12:01 PM
On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
<dmine45.NOSPAM@yahoo.com> wrote:

>You probably need to change the NAM settings
>
>I assume the v60 has the same programming codes as the v120. If so, do
>the following:
>
>From an idle screen, dial
>
>74663 # Menu Menu
>
>Then select NAM1
>
>Make sure the MIN and MDN are the same number (the correct number for
>your phone)
>
>Dave

When I input 74663# Menu - it gets me into a new new menu of choices,
but the second "menu" button doesn't do anything. I'm using a V60g.
Anybody have a clue?


Reply With Quote
Kirk-O-Scottland
Kirk-O-Scottland's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 09-30-2003, 06:36 PM
<ian@hubling.com> wrote in message
news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
> On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
> <dmine45.NOSPAM@yahoo.com> wrote:
>
> >You probably need to change the NAM settings
> >
> >I assume the v60 has the same programming codes as the v120. If so, do
> >the following:
> >
> >From an idle screen, dial
> >
> >74663 # Menu Menu
> >
> >Then select NAM1
> >
> >Make sure the MIN and MDN are the same number (the correct number for
> >your phone)
> >
> >Dave
>
> When I input 74663# Menu - it gets me into a new new menu of choices,
> but the second "menu" button doesn't do anything. I'm using a V60g.
> Anybody have a clue?
>
>

I have the same problem with a V60i I got for my wife from eBay. Still has
the original number in the "My Tel Number" window, and AT&T had no idea how
to correct it. I'll try the steps above when my wife gets home and report
back....


Reply With Quote
Kirk-O-Scottland
Kirk-O-Scottland's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 09-30-2003, 07:23 PM

"Kirk-O-Scottland" <kos@kosiam.not> wrote in message
news:vnjfpit8sfcg41@corp.supernews.com...
> <ian@hubling.com> wrote in message
> news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
> > On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
> > <dmine45.NOSPAM@yahoo.com> wrote:
> >
> > >You probably need to change the NAM settings
> > >
> > >I assume the v60 has the same programming codes as the v120. If so, do
> > >the following:
> > >
> > >From an idle screen, dial
> > >
> > >74663 # Menu Menu
> > >
> > >Then select NAM1
> > >
> > >Make sure the MIN and MDN are the same number (the correct number for
> > >your phone)
> > >
> > >Dave
> >
> > When I input 74663# Menu - it gets me into a new new menu of choices,
> > but the second "menu" button doesn't do anything. I'm using a V60g.
> > Anybody have a clue?
> >
> >
>
> I have the same problem with a V60i I got for my wife from eBay. Still
has
> the original number in the "My Tel Number" window, and AT&T had no idea
how
> to correct it. I'll try the steps above when my wife gets home and report
> back....
>
>

it did not work - hitting menu the first time brings up the dialing menu,
and hitting menu again does nothing.


Reply With Quote
Rod
Rod's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 10-09-2003, 06:36 PM
you gotta hit menu twice real fast.

Kirk-O-Scottland wrote:
:: "Kirk-O-Scottland" <kos@kosiam.not> wrote in message
:: news:vnjfpit8sfcg41@corp.supernews.com...
::: <ian@hubling.com> wrote in message
::: news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
:::: On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
:::: <dmine45.NOSPAM@yahoo.com> wrote:
::::
::::: You probably need to change the NAM settings
:::::
::::: I assume the v60 has the same programming codes as the v120. If
::::: so, do the following:
:::::
::::: From an idle screen, dial
:::::
::::: 74663 # Menu Menu
:::::
::::: Then select NAM1
:::::
::::: Make sure the MIN and MDN are the same number (the correct number
::::: for your phone)
:::::
::::: Dave
::::
:::: When I input 74663# Menu - it gets me into a new new menu of
:::: choices, but the second "menu" button doesn't do anything. I'm
:::: using a V60g. Anybody have a clue?
::::
::::
:::
::: I have the same problem with a V60i I got for my wife from eBay.
::: Still has the original number in the "My Tel Number" window, and
::: AT&T had no idea how to correct it. I'll try the steps above when
::: my wife gets home and report back....
:::
:::
::
:: it did not work - hitting menu the first time brings up the dialing
:: menu, and hitting menu again does nothing.


Reply With Quote
Rod
Rod's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 10-09-2003, 06:49 PM
you can also try menu 073887*


Kirk-O-Scottland wrote:
:: "Kirk-O-Scottland" <kos@kosiam.not> wrote in message
:: news:vnjfpit8sfcg41@corp.supernews.com...
::: <ian@hubling.com> wrote in message
::: news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
:::: On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
:::: <dmine45.NOSPAM@yahoo.com> wrote:
::::
::::: You probably need to change the NAM settings
:::::
::::: I assume the v60 has the same programming codes as the v120. If
::::: so, do the following:
:::::
::::: From an idle screen, dial
:::::
::::: 74663 # Menu Menu
:::::
::::: Then select NAM1
:::::
::::: Make sure the MIN and MDN are the same number (the correct number
::::: for your phone)
:::::
::::: Dave
::::
:::: When I input 74663# Menu - it gets me into a new new menu of
:::: choices, but the second "menu" button doesn't do anything. I'm
:::: using a V60g. Anybody have a clue?
::::
::::
:::
::: I have the same problem with a V60i I got for my wife from eBay.
::: Still has the original number in the "My Tel Number" window, and
::: AT&T had no idea how to correct it. I'll try the steps above when
::: my wife gets home and report back....
:::
:::
::
:: it did not work - hitting menu the first time brings up the dialing
:: menu, and hitting menu again does nothing.


Reply With Quote
Kirk-O-Scottland
Kirk-O-Scottland's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 10-09-2003, 10:09 PM

"Rod" <cellular-dude@sprintpcs.com> wrote in message
news:bm47en$idgj3$1@ID-57098.news.uni-berlin.de...
> you can also try menu 073887*
>
>
> Kirk-O-Scottland wrote:
> :: "Kirk-O-Scottland" <kos@kosiam.not> wrote in message
> :: news:vnjfpit8sfcg41@corp.supernews.com...
> ::: <ian@hubling.com> wrote in message
> ::: news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
> :::: On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
> :::: <dmine45.NOSPAM@yahoo.com> wrote:
> ::::
> ::::: You probably need to change the NAM settings
> :::::
> ::::: I assume the v60 has the same programming codes as the v120. If
> ::::: so, do the following:
> :::::
> ::::: From an idle screen, dial
> :::::
> ::::: 74663 # Menu Menu
> :::::
> ::::: Then select NAM1
> :::::
> ::::: Make sure the MIN and MDN are the same number (the correct number
> ::::: for your phone)
> :::::
> ::::: Dave
> ::::
> :::: When I input 74663# Menu - it gets me into a new new menu of
> :::: choices, but the second "menu" button doesn't do anything. I'm
> :::: using a V60g. Anybody have a clue?
> ::::
> ::::
> :::
> ::: I have the same problem with a V60i I got for my wife from eBay.
> ::: Still has the original number in the "My Tel Number" window, and
> ::: AT&T had no idea how to correct it. I'll try the steps above when
> ::: my wife gets home and report back....
> :::
> :::
> ::
> :: it did not work - hitting menu the first time brings up the dialing
> :: menu, and hitting menu again does nothing.
>
>


Reply With Quote
Aekthada Chivakanit
Aekthada Chivakanit's Avatar
Posts: n/a
 
Re: How to change "My Tel Number" on a V60i? Service Technician menu?
Posted: 10-21-2003, 02:30 PM
Here's a step-by-step procedure:

1. Enter the menu
2. Go to "Settings"
3. Go to "Phone Status"
4. Go to "My Tel. Number"
5. You will now see a list of 5 slots of your own telephone number. Four of
them should be empty (usually number 2-4.) From here you can edit the list
and choose one of them as your default.

Good luck!

Aek C.
"Kirk-O-Scottland" <kos@kosiam.not> wrote in message
news:vnjihu6kmgoa02@corp.supernews.com...
>
> "Kirk-O-Scottland" <kos@kosiam.not> wrote in message
> news:vnjfpit8sfcg41@corp.supernews.com...
> > <ian@hubling.com> wrote in message
> > news:4doinvs8ibjarhgvotiaq3d92v0v8hr55l@4ax.com...
> > > On Sat, 13 Sep 2003 11:40:20 GMT, Diamond Dave
> > > <dmine45.NOSPAM@yahoo.com> wrote:
> > >
> > > >You probably need to change the NAM settings
> > > >
> > > >I assume the v60 has the same programming codes as the v120. If so,
do
> > > >the following:
> > > >
> > > >From an idle screen, dial
> > > >
> > > >74663 # Menu Menu
> > > >
> > > >Then select NAM1
> > > >
> > > >Make sure the MIN and MDN are the same number (the correct number for
> > > >your phone)
> > > >
> > > >Dave
> > >
> > > When I input 74663# Menu - it gets me into a new new menu of choices,
> > > but the second "menu" button doesn't do anything. I'm using a V60g.
> > > Anybody have a clue?
> > >
> > >
> >
> > I have the same problem with a V60i I got for my wife from eBay. Still
> has
> > the original number in the "My Tel Number" window, and AT&T had no idea
> how
> > to correct it. I'll try the steps above when my wife gets home and
report
> > back....
> >
> >
>
> it did not work - hitting menu the first time brings up the dialing menu,
> and hitting menu again does nothing.
>
>


Reply With Quote
 
Thread Tools Display Modes
Reply

« C333 signal strength problem? | Motorola CD 930 »

Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Blackberry 7290 - how to disable "emergency call" in menu? Casper GSM 0 05-29-2005 02:34 PM
Change "Writing language" in Nokia 6630 Peter Theill Nokia 0 04-28-2005 07:41 PM
Nokia 8265 change name from "HOME" Twis Nokia 3 11-22-2003 04:43 PM
Disappearing "Cell Info Display" menu item Mike S. Nokia 1 09-26-2003 07:29 PM
t68i - meaning on "SAT on" in Engineer config menu Kevin Sony Ericsson 2 06-25-2003 11:59 PM


All times are GMT. The time now is 03:12 PM.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33