Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE?

Posted: 03-06-2006, 12:38 PM
Hi,

I have a GC79 and a GC89. Both of which I am trying to get working in
two different laptops.

They work fine when I use the Sony Ericsson Wireless Connection
Manager. However, I need to have them set up via Dial-Up Networking
(DUN) so I can automate the process of bringing the connection up and
down.

They are on the T-Mobile service, if that matters.

I tried to dial *99***1#. It will connect, but sits at "registering on
network" for a long time and then reports either a "timeout" or
something about a failed response from the server.

I did the AT+GCDCONT.... command that sets the APN to
internet3.voicestream.com as profile 1.

I suspect that I need additional modem initialization commands to
properly make a connection.

Any help would be appreciated!!!
John

Reply With Quote

Responses to "Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE?"

David W Studeman
David W Studeman's Avatar
Posts: n/a
 
Re: Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE?
Posted: 03-09-2006, 05:04 AM
On Mon, 06 Mar 2006 04:38:32 -0800, John wrote:

> Hi,
>
> I have a GC79 and a GC89. Both of which I am trying to get working in
> two different laptops.
>
> They work fine when I use the Sony Ericsson Wireless Connection
> Manager. However, I need to have them set up via Dial-Up Networking
> (DUN) so I can automate the process of bringing the connection up and
> down.
>
> They are on the T-Mobile service, if that matters.
>
> I tried to dial *99***1#. It will connect, but sits at "registering on
> network" for a long time and then reports either a "timeout" or
> something about a failed response from the server.
>
> I did the AT+GCDCONT.... command that sets the APN to
> internet3.voicestream.com as profile 1.
>
> I suspect that I need additional modem initialization commands to
> properly make a connection.
>
> Any help would be appreciated!!!
> John


Oh yes! Good ole S/E cards! The apn you have a grip on but the strangest
oddity in the S/E cards is that it also takes an AT command to turn on the
radio which is what the software manager does when you launch it. I
believe all other brands start the radio as soon as they are plugged in
which makes sense. The command for that is AT+CFUN=1 this can only be a 0
or a 1, 1 is positive or on. The other part is registration AT+CGREG=1.
The biggest pain about this is that the startup will fail the first time
because it takes several seconds or more to power up the radio and let it
find a signal. I use a 30 second holdoff before redialing. The init string
can be concatenated into one string and it won't choke on it. Once you
pass the command to set the radio to ON, it will NOT turn the radio off
unless you unplug the card so the second time you pass the string, it
ignores the AT commands that are already active in the card's current
state and just dials and sets up the connection. It's basically a modem
with a built in serial port but unlike other cards, it uses just one port
for everything rather than a second port for information, signal strength
and the like.

Dave
Reply With Quote
frank.lawler@gmail.com
frank.lawler@gmail.com's Avatar
Posts: n/a
 
Re: Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE?
Posted: 03-14-2006, 09:47 AM
try this. at+cgdcont=3,"IP","internet3.voicestream.com"

and dial *99***3#

the se card usually prefer cid 3 or higher when using a dun.

Also you may want to add at+cfun=1; to the front, if you do, drop the
second at. Windows will sometimes throw error 692 at you with the
second at in there.

Reply With Quote
John Navas
John Navas's Avatar
Posts: n/a
 
Re: Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE?
Posted: 03-16-2006, 03:23 PM
[POSTED TO alt.cellular.data - REPLY ON USENET PLEASE]

In <1142329653.280687.107410@v46g2000cwv.googlegroups .com> on 14 Mar 2006
01:47:33 -0800, frank.lawler@gmail.com wrote:

>try this. at+cgdcont=3,"IP","internet3.voicestream.com"
>
>and dial *99***3#
>
>the se card usually prefer cid 3 or higher when using a dun.


That depends on how the card is configured.

--
Best regards, SEE THE FAQ FOR CINGULAR WIRELESS AT
John Navas <http://en.wikibooks.org/wiki/Cingular_Wireless_FAQ>
Reply With Quote
 
Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Will SonyEricsson GC79/GC89 work with Windows Dial-Up Networking on GPRS/EDGE? John Sony Ericsson 3 03-16-2006 03:23 PM
Problems with using V3 for dial-up networking over Bluetooth Norm Powroz Motorola 0 04-29-2005 09:04 PM
Installing a Dial Up Networking (DUN) conection programatically emars Bluetooth 0 03-04-2005 05:07 PM
Windows RWIN for EDGE and UMTS John Navas GSM 3 08-07-2004 11:34 AM
Bluetooth with iPaq 1940, SonyEricsson T630, Windows XP and Thinkpad R40 Poshi Bluetooth 3 03-01-2004 04:17 AM


All times are GMT. The time now is 02:42 AM.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33