Communication between two PC using BT

> AT commands are supported by Hayes compatible modems. If you set up a
> connection between two dumb terminals (e.g. between two PCs running a
> terminal program) then keystrokes on one will appear at the other end,
> that's all.
>
> A bluetooth-USB module isn't a Hayes compatible modem.
>
>
> Peter.
-------------
You mean That the communication between TWO USB module (Two PC) is
completely transparent when we use serial profile ? No initialisation is
required to starting communication ?
Thanks
T,@+

> >> AT commands are supported by Hayes compatible modems. If you set up a
> >> connection between two dumb terminals (e.g. between two PCs running a
> >> terminal program) then keystrokes on one will appear at the other end,
> >> that's all.
> >>
> >> A bluetooth-USB module isn't a Hayes compatible modem.
> >>
> >>
> >> Peter.

I'm testing a simple com application on one PC, on the second i'm using
HyperTerminal, every time i send Data (Not absolutely AT commands), i get a
Pop-Up windows message telling me that a connexion was established between
the two PCs ! But nothing is displayed on the HyperTerminal. When i type ATA
<cr> on the hyperterminal all what i send from the first PC are displayed or
the second ! It's the only command wich work.

All this is the first stage software validation to be use with a BT USB
adapter to communicate with Blue2i BlueTooth module. All what i hope now is
to know more about how BT USB works (Blue2i AT manual is fully discribed),
anny one tried to make this ?
Thanks.
Tarek.