Problems with, Pocket PC, Bluetooth, Internet Sharing, LAN, and my mental state!

The problem is that your LAN usesing Internet Connection sharing uses
192.168.0.1 and that is what BT wants to use as well.The solution is to set
the LAN to use something else besides 192.168.0.1 . Fopr further details, go
to Mauricios site, he has a work around. Great site
Mauricio Freitas
Bluetooth Guides: http://www.geekzone.co.nz/content.asp?contentid=449
Performance Center: http://www.geekzone.co.nz/content.asp?ContentId=2028

--
"And then I said; "If your shipping internationally, you gotta use FEDEX!"


"Antony Leedale"
<leedale30_REMOVE_ALL_THIS_CRAP_TO_MIAL_ME_BACK_CH EERS@hotmail.com> wrote in
message news:1Sbdc.42330$Id.21485@news-binary.blueyonder.co.uk...
> I am having real problems getting my Pocket PC iPAQ 2210 connecting to a
> shared internet connection without it makeing my LAN not work. I have 3
> computers on my LAN through a broadband router/switch (Buffalo AirStation
> G54). The LAN worked fine untill i set up my internet sharing so that the
> iPAQ could connect to the internet through my Bluetooth dongle.
>
> Is there anyway to set up the computer that is sharing the internet with
the
> iPAQ so that the LAN works and the internet bluetooth connection works at
> the same time?
>
> Please help as I am going slowly insane!
>
> TIA
> Antony
>
>

I am having the same kind of trouble right now. I am using a Toshiba E330
with the Toshiba SD-Card2 and
a MSI Bluetooth USB dongle for the PC side. I can easily create a Bluetooth
internet connection through active
sync by creating a virtual serial connection; but it is rather slow and not
very stable at my place.

I have been trying out the guides at geekzone.co.nz aswell (great stuff) but
unfortunately I cannot get it to work.
I then decided to go for www.nat32.com and try this out - but again I am
trapped and I'm getting nowhere, even
after reading the manual and trying out whatever crossed my mind.

My PC consists of a PCI LAN adapter 172.16.1.20 (running webserver) and a
PCI LAN adapter 172.16.1.65
(this one is installed for the purpose of letting it share the connection)
My entire IP span is 172.16.X.X, so it should
not conflict with Windows Internet Connection Sharing (but also this part
doesn't work with me). The PDA and my
PC is paired and connected for a personal networking, but the internet part
is just not working.

Can anyone give me a hint or clue?`

Kind regards,
Henrik


"PDA Man" <pda@man.net> skrev i en meddelelse
news:gaadnaZ3I9Nd_Ojd4p2dnA@comcast.com...
> The problem is that your LAN usesing Internet Connection sharing uses
> 192.168.0.1 and that is what BT wants to use as well.The solution is to
set
> the LAN to use something else besides 192.168.0.1 . Fopr further details,
go
> to Mauricios site, he has a work around. Great site
> Mauricio Freitas
> Bluetooth Guides: http://www.geekzone.co.nz/content.asp?contentid=449

Same here.get rid of msi stuff, its crap

"Henrik Matzen" <zarch[REMOVE THIS]@triflex.dk> wrote in message
newswidc.138674$jf4.7352278@news000.worldonline. dk...
> I am having the same kind of trouble right now. I am using a Toshiba E330
> with the Toshiba SD-Card2 and
> a MSI Bluetooth USB dongle for the PC side. I can easily create a
Bluetooth
> internet connection through active
> sync by creating a virtual serial connection; but it is rather slow and
not
> very stable at my place.
>
> I have been trying out the guides at geekzone.co.nz aswell (great stuff)
but
> unfortunately I cannot get it to work.
> I then decided to go for www.nat32.com and try this out - but again I am
> trapped and I'm getting nowhere, even
> after reading the manual and trying out whatever crossed my mind.
>
> My PC consists of a PCI LAN adapter 172.16.1.20 (running webserver) and a
> PCI LAN adapter 172.16.1.65
> (this one is installed for the purpose of letting it share the connection)
> My entire IP span is 172.16.X.X, so it should
> not conflict with Windows Internet Connection Sharing (but also this part
> doesn't work with me). The PDA and my
> PC is paired and connected for a personal networking, but the internet
part
> is just not working.
>
> Can anyone give me a hint or clue?`
>
> Kind regards,
> Henrik
>
>
> "PDA Man" <pda@man.net> skrev i en meddelelse
> news:gaadnaZ3I9Nd_Ojd4p2dnA@comcast.com...
> > The problem is that your LAN usesing Internet Connection sharing uses
> > 192.168.0.1 and that is what BT wants to use as well.The solution is to
> set
> > the LAN to use something else besides 192.168.0.1 . Fopr further
details,
> go
> > to Mauricios site, he has a work around. Great site
> > Mauricio Freitas
> > Bluetooth Guides: http://www.geekzone.co.nz/content.asp?contentid=449
>
>

Hello

I am sure you have all heard about the FAPTurbo Automated Forex Trading Robot (their site is fapturbolive.net)

There has been a lot of hype around it and it claims to make people rich. I personally think it's a scam and would
never purchase it, but there are lots of people who believe in it.

Lot of review claiming that it works...How many of those reviewers have actually tried it? These people are
just trying to make a commission off your purchase. The reviews are fake...

I recently read a report by a beta tester which was actually really an eye opener to me.

You might wanna check it out:
http://www.FAPTurboScam.org

Regards