Ericsson T 39 and HP iPAQ H4150 problem

it never dials.I'm trying to setup a GPRS connection

"Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
news:A2Qvb.9101$ws.805238@news02.tsnz.net...
> Does it dial sometimes or never?
>
> What are you trying to dial? A connection to an ISP, connection to GPRS or
a
> phone number from the contacts?
>
> --
> Mauricio Freitas
> Handhelds, mobile: http://www.geekzone.co.nz
> Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
>
>
> "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
> message news:3fbfc09b$0$1493$e4fe514c@news.xs4all.nl...
> > Hi,
> >
> > it looks like my H4150 doesn't communicate stable with my T39.
Sometime's
> > the H4150 can connect to the T39 (to set-up a GPRS
connection)...sometimes
> > not. When the H4150 connects to the T39 you can see that they
communicate
> > but the T39 doesn't dial in...who can help?
> >
> > regards,
> >
> > Nico
> >
> >
>
>

Have you had a look in our Bluetooth Guides? The Windows Mobile 2003 section
has one for mobile connection to GPRS.

Make sure your location info is correct: open contacts, Options and enter
the correct area code (for your mobile number) and country.

On your connection make sure you don't select use Location or something like
this (don't have my PPC here now).

Check with your provider if you should use *99# or (*99***1# depending on
mobile phone - 1 can be any number that matches your mobile configuration).
Also, some may need to have a specific AP selected. The guides show the init
string for this.


--
Mauricio Freitas
Handhelds, mobile: http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449


"Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
message news:3fc07deb$0$1496$e4fe514c@news.xs4all.nl...
> it never dials.I'm trying to setup a GPRS connection
>
> "Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
> news:A2Qvb.9101$ws.805238@news02.tsnz.net...
> > Does it dial sometimes or never?
> >
> > What are you trying to dial? A connection to an ISP, connection to GPRS
or
> a
> > phone number from the contacts?
> >
> > --
> > Mauricio Freitas
> > Handhelds, mobile: http://www.geekzone.co.nz
> > Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
> >
> >
> > "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
> > message news:3fbfc09b$0$1493$e4fe514c@news.xs4all.nl...
> > > Hi,
> > >
> > > it looks like my H4150 doesn't communicate stable with my T39.
> Sometime's
> > > the H4150 can connect to the T39 (to set-up a GPRS
> connection)...sometimes
> > > not. When the H4150 connects to the T39 you can see that they
> communicate
> > > but the T39 doesn't dial in...who can help?
> > >
> > > regards,
> > >
> > > Nico
> > >
> > >
> >
> >
>
>

"Nico" (in plaats van een X een -)> schrieb:

> Hi,
>
> it looks like my H4150 doesn't communicate stable with my T39.
> Sometime's the H4150 can connect to the T39 (to set-up a GPRS
> connection)...sometimes not. When the H4150 connects to the T39 you
> can see that they communicate but the T39 doesn't dial in...who can
> help?
>
> regards,
>
> Nico
>

I have seen the same thing happen between my iPaq 2210 and T39m. The
2210 still has the buggy Widcomm stack 1.4.1 build 04 which seems
responsible for the strange behaviour.
The iPaq will try to dial-in two times and then give up by displaying an
error message.
In this situation I have to soft-reset the 2210 and all will work as
should.

There is already an updated bluetooth manager (build 58) available for
some device types and languages. Hopefully this one will fix the bugs
seen with the older version.

Mauricio,

thanks for tour support. But all setting are good (I had a Jornada with CF
card but that one has broken). When I look at your screendumps it looks like
I have a different version of the blue tooth manager...

regards,

Nico
"Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
news:LO%vb.9213$ws.819029@news02.tsnz.net...
> Have you had a look in our Bluetooth Guides? The Windows Mobile 2003
section
> has one for mobile connection to GPRS.
>
> Make sure your location info is correct: open contacts, Options and enter
> the correct area code (for your mobile number) and country.
>
> On your connection make sure you don't select use Location or something
like
> this (don't have my PPC here now).
>
> Check with your provider if you should use *99# or (*99***1# depending on
> mobile phone - 1 can be any number that matches your mobile
configuration).
> Also, some may need to have a specific AP selected. The guides show the
init
> string for this.
>
>
> --
> Mauricio Freitas
> Handhelds, mobile: http://www.geekzone.co.nz
> Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
>
>
> "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
> message news:3fc07deb$0$1496$e4fe514c@news.xs4all.nl...
> > it never dials.I'm trying to setup a GPRS connection
> >
> > "Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
> > news:A2Qvb.9101$ws.805238@news02.tsnz.net...
> > > Does it dial sometimes or never?
> > >
> > > What are you trying to dial? A connection to an ISP, connection to
GPRS
> or
> > a
> > > phone number from the contacts?
> > >
> > > --
> > > Mauricio Freitas
> > > Handhelds, mobile: http://www.geekzone.co.nz
> > > Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
> > >
> > >
> > > "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
> > > message news:3fbfc09b$0$1493$e4fe514c@news.xs4all.nl...
> > > > Hi,
> > > >
> > > > it looks like my H4150 doesn't communicate stable with my T39.
> > Sometime's
> > > > the H4150 can connect to the T39 (to set-up a GPRS
> > connection)...sometimes
> > > > not. When the H4150 connects to the T39 you can see that they
> > communicate
> > > > but the T39 doesn't dial in...who can help?
> > > >
> > > > regards,
> > > >
> > > > Nico
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Gerd,

you have the same problem. But even after a soft-boot it doens't work.
I have widcomm 1.4.1 build 74

regards,

Nico

> I have seen the same thing happen between my iPaq 2210 and T39m. The
> 2210 still has the buggy Widcomm stack 1.4.1 build 04 which seems
> responsible for the strange behaviour.
> The iPaq will try to dial-in two times and then give up by displaying an
> error message.
> In this situation I have to soft-reset the 2210 and all will work as
> should.
>
> There is already an updated bluetooth manager (build 58) available for
> some device types and languages. Hopefully this one will fix the bugs
> seen with the older version.

I'm running 1.4.1.06 and I see in your posts you're running .74

--
Mauricio Freitas
Handhelds, mobile: http://www.geekzone.co.nz
Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449


"Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
message news:3fc0a594$0$1489$e4fe514c@news.xs4all.nl...
> Mauricio,
>
> thanks for tour support. But all setting are good (I had a Jornada with CF
> card but that one has broken). When I look at your screendumps it looks
like
> I have a different version of the blue tooth manager...
>
> regards,
>
> Nico
> "Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
> news:LO%vb.9213$ws.819029@news02.tsnz.net...
> > Have you had a look in our Bluetooth Guides? The Windows Mobile 2003
> section
> > has one for mobile connection to GPRS.
> >
> > Make sure your location info is correct: open contacts, Options and
enter
> > the correct area code (for your mobile number) and country.
> >
> > On your connection make sure you don't select use Location or something
> like
> > this (don't have my PPC here now).
> >
> > Check with your provider if you should use *99# or (*99***1# depending
on
> > mobile phone - 1 can be any number that matches your mobile
> configuration).
> > Also, some may need to have a specific AP selected. The guides show the
> init
> > string for this.
> >
> >
> > --
> > Mauricio Freitas
> > Handhelds, mobile: http://www.geekzone.co.nz
> > Bluetooth guides: http://www.geekzone.co.nz/content.asp?contentid=449
> >
> >
> > "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote in
> > message news:3fc07deb$0$1496$e4fe514c@news.xs4all.nl...
> > > it never dials.I'm trying to setup a GPRS connection
> > >
> > > "Mauricio Freitas" <dr.emailposter@nowhere.invalid> wrote in message
> > > news:A2Qvb.9101$ws.805238@news02.tsnz.net...
> > > > Does it dial sometimes or never?
> > > >
> > > > What are you trying to dial? A connection to an ISP, connection to
> GPRS
> > or
> > > a
> > > > phone number from the contacts?
> > > >
> > > > --
> > > > Mauricio Freitas
> > > > Handhelds, mobile: http://www.geekzone.co.nz
> > > > Bluetooth guides:
http://www.geekzone.co.nz/content.asp?contentid=449
> > > >
> > > >
> > > > "Nico" <nico@brandtXduijker.net (in plaats van een X een -)> wrote
in
> > > > message news:3fbfc09b$0$1493$e4fe514c@news.xs4all.nl...
> > > > > Hi,
> > > > >
> > > > > it looks like my H4150 doesn't communicate stable with my T39.
> > > Sometime's
> > > > > the H4150 can connect to the T39 (to set-up a GPRS
> > > connection)...sometimes
> > > > > not. When the H4150 connects to the T39 you can see that they
> > > communicate
> > > > > but the T39 doesn't dial in...who can help?
> > > > >
> > > > > regards,
> > > > >
> > > > > Nico
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>