using T610 dialup from iPAQ 3870 using bluetooth

Posted: 08-14-2003, 02:14 PM
Hi there,

Is there any way to use Sony Ericsson T610's dialup service from iPAQ
3870 using Bluetooth medium?

I have both the devices. For setup, I selected "Bluetooth Dialup
Modem" in the internet settings on iPAQ 3870. Then I turned on
Bluetooth on iPAQ 3870 as well as on Sony Ericsson T610. Then I
clicked connect on iPAQ. I see that my mobile phone is dialing my
internet provider's number but somehow just after a second it doesn't
wait and goes to standby mode and I see this is happening twice
(meaning iPAQ then retries, I guess), and after that iPAQ displays the
error message that it cannot continue.

Moreover, when I see My Devices -> iPAQ PocketPC -> Service List on
T610, it just shows "Object Push" and "File Transfer" and no "Dial-up"
services. Do I need to install T610 specific dialup modem driver on my
iPAQ 3870, if yes? then from where can I find such driver? Thanks in
advance.

Yousuf
Reply With Quote

Responses to "using T610 dialup from iPAQ 3870 using bluetooth"

GSM Resource
GSM Resource's Avatar
Posts: n/a
 
Re: using T610 dialup from iPAQ 3870 using bluetooth
Posted: 08-17-2003, 05:40 PM
I'm not sure about 3870, but I was able to use T610 with my iPAQ 1945
(Pocket PC 2003) using both Bluetooth and IR modems. It worked like a charm.
No additional software was needed. I'd suggest you set up IR dial-up first
to make sure your dialing properties are correct and then change modem type
from IR to Bluetooth.

------------
GSM Resource.
http://groups.yahoo.com/group/gsmresource/
Remove brackets in the address below
gsmresource[@]yahoo.com

"Yousuf Sayed" <yousuf@netprosys.com> wrote in message
news:9e7651b5.0308140514.1c4df51a@posting.google.c om...
> Hi there,
>
> Is there any way to use Sony Ericsson T610's dialup service from iPAQ
> 3870 using Bluetooth medium?
>
> I have both the devices. For setup, I selected "Bluetooth Dialup
> Modem" in the internet settings on iPAQ 3870. Then I turned on
> Bluetooth on iPAQ 3870 as well as on Sony Ericsson T610. Then I
> clicked connect on iPAQ. I see that my mobile phone is dialing my
> internet provider's number but somehow just after a second it doesn't
> wait and goes to standby mode and I see this is happening twice
> (meaning iPAQ then retries, I guess), and after that iPAQ displays the
> error message that it cannot continue.
>
> Moreover, when I see My Devices -> iPAQ PocketPC -> Service List on
> T610, it just shows "Object Push" and "File Transfer" and no "Dial-up"
> services. Do I need to install T610 specific dialup modem driver on my
> iPAQ 3870, if yes? then from where can I find such driver? Thanks in
> advance.
>
> Yousuf



Reply With Quote
Yousuf Sayed
Yousuf Sayed's Avatar
Posts: n/a
 
Re: using T610 dialup from iPAQ 3870 using bluetooth
Posted: 08-28-2003, 02:28 PM
Thanks a lot, initially when I tried with just a bluetooth it didn't
get connected, but as you suggested that first try with infrared and
then bluetooth, it worked. I used "Generic IrDA modem" for connecting
via infrared and then I used "Bluetooth Dialup Modem" for connecting
via bluetooth. Both the drivers are supplied with iPAQ 3870. It is
strange that at first it didn't get connected with bluetooth, but
trying with infrared and then just change the modem type to bluetooth
got it worked.

Thanks again.

Yousuf

"GSM Resource" <gsmresource[@]yahoo.com> wrote in message news:<2eO%a.139698$Oz4.28138@rwcrnsc54>...
> I'm not sure about 3870, but I was able to use T610 with my iPAQ 1945
> (Pocket PC 2003) using both Bluetooth and IR modems. It worked like a charm.
> No additional software was needed. I'd suggest you set up IR dial-up first
> to make sure your dialing properties are correct and then change modem type
> from IR to Bluetooth.
>
> ------------
> GSM Resource.
> http://groups.yahoo.com/group/gsmresource/
> Remove brackets in the address below
> gsmresource[@]yahoo.com
>
> "Yousuf Sayed" <yousuf@netprosys.com> wrote in message
> news:9e7651b5.0308140514.1c4df51a@posting.google.c om...
> > Hi there,
> >
> > Is there any way to use Sony Ericsson T610's dialup service from iPAQ
> > 3870 using Bluetooth medium?
> >
> > I have both the devices. For setup, I selected "Bluetooth Dialup
> > Modem" in the internet settings on iPAQ 3870. Then I turned on
> > Bluetooth on iPAQ 3870 as well as on Sony Ericsson T610. Then I
> > clicked connect on iPAQ. I see that my mobile phone is dialing my
> > internet provider's number but somehow just after a second it doesn't
> > wait and goes to standby mode and I see this is happening twice
> > (meaning iPAQ then retries, I guess), and after that iPAQ displays the
> > error message that it cannot continue.
> >
> > Moreover, when I see My Devices -> iPAQ PocketPC -> Service List on
> > T610, it just shows "Object Push" and "File Transfer" and no "Dial-up"
> > services. Do I need to install T610 specific dialup modem driver on my
> > iPAQ 3870, if yes? then from where can I find such driver? Thanks in
> > advance.
> >
> > Yousuf

Reply With Quote
 
Thread Tools Display Modes
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: IPAQ Dialup trouble with Ericsson(Bluetooth). n1g3r14n_pr1nc3@salmahayeksknockers.edu Sony Ericsson 3 04-03-2004 05:39 PM
T610 & IPAQ Stephen Gray Sony Ericsson 4 12-17-2003 12:55 AM
Sync contacts/emails/notes etc of P800 with iPaq 3870 ©® Sony Ericsson 3 10-27-2003 10:59 PM
Help in choosing the right USB Bluetooth adapter for T68i and Ipaq 1940/Palm T2 Vin Sony Ericsson 11 09-02-2003 04:48 PM
Ipaq 3870 with a Siemens S55 Poss Bluetooth 0 07-02-2003 05:44 AM


All times are GMT. The time now is 09:58 PM.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33